SandPort
Ethernet DMX Nodes for Installations
- Sandard NEMA 2-gang wallplate for installed systems.
- Art-Net I, II, & 3 and Streaming ACN E1.31.
- Legacy protocol support on select models.
- Two bi-directional DMX-512A ports.
- User selectable per port Ethernet to DMX or DMX to Ethernet.
- Self-healing ESD & transient protection.
- Available with male or female XLRs or combination.
- LEDs indicate DMX port activity.
- Powerful 32bit ARM processor.
- Support for both 10BaseT and 100BaseT.
- Auto MDI/MDI-X for straight or cross-over CAT5/6 cabling.
- Power over Ethernet 802.3af.
- Free software for configuration, testing, and management.
Supported Features
Model | DMX Universes |
PoE | Legacy Protocols |
List Price US$ |
Purchace | Spec Sheet |
---|---|---|---|---|---|---|
SP-BBB2/100 | 2 | 449 | ||||
SP-AAA2/100 | 2 | 549 |
The SandPort DMX nodes offer exceptionally cost-effective DMX-over-Ethernet connectivity in a package well suited for integration with permanently installed stage, studio, and architectural lighting systems. The extensive protocol support enables input and output for the majority of today’s entertainment, as well as architectural, lighting control systems, show controllers, and visualizers.
The two DMX ports are bi-directional for maximum flexibility so that any port, independent of the XLR connector gender, can be configured as an input or output. The SandPort supports 10BaseT and 100BaseT for unparalleled throughput and easy integration with any network topology. Auto MDI/MDI-X eliminates the need to worry about straight vs. cross-over cabling. Power over Ethernet provides effortless power via readily available PoE switches or mid-span injectors.
SandPorts are easily configured and managed with the free Sand Device Browser or with any other SandNet software application. A factory default button provides a convenient configuration starting point for the novice user. SandPorts also supports firmware uploads over Ethernet to accommodate the rapidly evolving world of entertainment networks.
Specifications:
Mechanical:
2-gange wall plate for standard NEMA 4" back-box.
4 screw holes for mounting to back-box.
Lightly textured black polyurethane paint.
White epoxy silk-screened legends.
Dedicated area for permanent marking
4.5 x 4.5 x 1.6" / 114 x 114 x 41mm.
5.4 oz / 155g.
Connectors:
2 x DMX - gold plated 5P M or F XLR.
1 x Ethernet RJ-45.
User Interface:
1 x Status / heartbeat indicator LED.
2 x DMX status and activity LED.
1 x Factory default configuration button.
Power:
Power over Ethernet IEEE 802.3af 2W 48V
All features might not be available at the time of the product release. All specifications are subject to change without notice.
Legacy Protocol Support
Protocol | DMX In | DMX Out |
---|---|---|
AVAB IPX | ||
Colornet | ||
Hydra Net | ||
Pathport | ||
Shownet |
Note that legacy protocols such as AVAB IPX/UDP, Color-Net, Compulite, ETCNet2/Net3, HDL-Net, Hydra-Net, Pathport, SA-Net, SandNet, & Strand ShowNet, as well as ACN E1.17, might not be implemented to support all possible configurations and use scenarios. Use of a legacy protocol on one port may preclude the use of an alternate protocol on the other port. More information regarding protocol support can be found in the user manual. Contact SAND Network Systems before you purchase a SandBox for use with these protocols to ensure that it will work as intended in your particular application.